GST HSN Classification
HSN Codes for Plywood with GST Rates
The HSN Code for Plywood helps manufacturers, furniture makers, hardware dealers, and builders classify plywood products correctly. Commercial plywood, marine plywood, decorative plywood, and laminated plywood may have different HSN classifications depending on their composition.
ProductPlywood
HSN Entries74
GST Rate12% – 18%
Chapters2
Get Expert GST Assistance
Share your details and our GST experts will help you with HSN classification, GST rates, and compliance.
HSN Code & GST Rate List for Plywood
Showing 69 of 74 HS codes| HSN Code | Description | HS Code | Description | GST% |
|---|---|---|---|---|
| 4408 | Veneering sheets, including those made by slicing laminated wood, used for plywood or similar laminated wood; sawn along the length, sliced or peeled, planed or not, sanded, spliced or end-jointed, up to 6 mm thick | 440810 | Coniferous (softwood) veneer sheets for plywood or similar laminated wood, sawn lengthwise, sliced or peeled, up to 6 mm thick | 12% |
| 440831 | Veneer sheets of dark red meranti, light red meranti and meranti bakau, used for plywood or laminated wood, up to 6 mm thick | 12% | ||
| 440839 | Veneer sheets of tropical wood listed in Subheading Note 1 of this chapter, up to 6 mm thick (dark red meranti, light red meranti and meranti bakau not covered) | 12% | ||
| 440890 | Other veneer sheets for plywood or laminated wood, up to 6 mm thick (tropical wood of Subheading Note 2 and coniferous wood not covered) | 12% | ||
| 44081010 | Sheets used for making plywood | 12% | ||
| 44083110 | Meranti veneer sheets used for plywood | 12% | ||
| 44089010 | Other sheets used for making plywood | 12% | ||
| 4411 | Fibreboard made from wood or other woody material, bonded with resins or other organic agents or not (particle board, laminated wood with a plywood layer, composite panels faced with fibreboard, paperboard and identifiable furniture parts not covered) | 441111 | Fibreboard with density of 0.8 g/cm³, not mechanically worked or surface-coated | 18% |
| 441119 | Fibreboard with density of 0.8 g/cm³, mechanically worked or surface-coated (sanded-only boards not covered) | 18% | ||
| 441121 | Fibreboard with density between 0.5 and 0.8 g/cm³, not mechanically worked or surface-coated | 18% | ||
| 441129 | Fibreboard with density between 0.5 and 0.8 g/cm³, mechanically worked or surface-covered (sanded-only boards not covered) | 18% | ||
| 441131 | Fibreboard with density between 0.35 and 0.5 g/cm³, not mechanically worked or surface-covered | 18% | ||
| 441139 | Fibreboard with density between 0.35 and 0.5 g/cm³, mechanically worked or surface-coated (sanded-only boards not covered) | 18% | ||
| 441191 | Fibreboard with density of 0.35 g/cm³, not mechanically worked or surface-coated | 18% | ||
| 441192 | Fibreboard with density of 0.8 g/cm³ (MDF, particle board and cellular wood panels faced with fibreboard on both sides not covered) | 18% | ||
| 441193 | Fibreboard with density between 0.5 and 0.8 g/cm³ (MDF, particle board and double-faced cellular wood panels not covered) | 18% | ||
| 441194 | Fibreboard with density of 0.5 g/cm³ (MDF, particle board and double-faced cellular wood panels not covered) | 18% | ||
| 441199 | Fibreboard with density of 0.35 g/cm³, mechanically worked or surface-coated (sanded-only boards not covered) | 18% | ||
| 4412 | Plywood, veneered panels and similar laminated wood (compressed wood sheets, cellular wood panels, parquet panels or sheets, inlaid wood and identifiable furniture parts not covered) | 44129990 | Other laminated wood items — includes commercial plywood, shuttering plywood, film faced plywood, acrylic board and firewood | 18% |
| 441219 | Plywood made only of wood sheets up to 6 mm thick (plywood of subheadings 4412.13 and 4412.14, compressed wood sheets, hollow-core composite panels, inlaid wood and furniture parts not covered) | 18% | ||
| 441232 | Plywood of wood sheets up to 6 mm thick with at least one outer ply of non-coniferous wood or other tropical wood than listed in Subheading Note 1 (bamboo, compressed wood sheets, cellular wood panels, inlaid wood and furniture parts not covered) — includes plywood sheet | 18% | ||
| 441239 | Plywood of wood sheets up to 6 mm thick (bamboo, plywood of subheadings 4412.31 and 4412.32, compressed wood sheets, cellular wood panels, inlaid wood and furniture parts not covered) | 18% | ||
| 441299 | Laminated wood without blockboard, laminboard or battenboard (bamboo, plywood made only of sheets up to 6 mm, compressed wood sheets, cellular wood panels, inlaid wood and furniture parts not covered) — includes film faced plywood | 18% | ||
| 441210 | Bamboo plywood, veneered panels and similar laminated wood without particle board, blockboard, laminboard or battenboard (compressed wood sheets, cellular wood panels, parquet panels, inlaid wood and furniture parts not covered) | 18% | ||
| 441213 | Plywood of wood sheets up to 6 mm thick with at least one outer ply of tropical wood listed in Subheading Note 1 (compressed wood sheets, hollow-core composite panels, inlaid wood and furniture parts not covered) | 18% | ||
| 441214 | Plywood of wood sheets up to 6 mm thick with at least one outer ply of non-coniferous or other tropical wood than listed in Subheading Note 1 (compressed wood sheets, hollow-core composite panels, inlaid wood and furniture parts not covered) | 18% | ||
| 441229 | Veneered panels and similar laminated wood with at least one outer ply of non-coniferous or other tropical wood than listed in Subheading Note 1, without particle board (plywood, compressed wood sheets, hollow-core composite panels, parquet panels, inlaid wood and furniture parts not covered) | 18% | ||
| 441231 | Plywood of wood sheets up to 6 mm thick with at least one outer ply of tropical wood listed in Subheading Note 1 (compressed wood sheets, cellular wood panels, inlaid wood and furniture parts not covered) | 18% | ||
| 441233 | Plywood of wood sheets up to 6 mm thick with at least one outer ply of non-coniferous wood such as alder, ash, beech, birch, cherry, chestnut, elm, eucalyptus, hickory, horse chestnut, lime, maple, oak, plane tree, poplar, aspen, robinia, tulipwood or walnut (bamboo, tropical wood outer ply, compressed wood sheets, cellular wood panels, inlaid wood and furniture parts not covered) | 18% | ||
| 441234 | Plywood of wood sheets up to 6 mm thick with at least one outer ply of non-coniferous wood (bamboo, tropical wood outer ply, alder, ash, beech, birch, cherry, chestnut, elm, eucalyptus, hickory, horse chestnut, lime, maple, oak, plane tree, poplar, aspen, robinia, tulipwood, walnut, compressed wood sheets, cellular wood panels, inlaid wood and furniture parts not covered) | 18% | ||
| 441294 | Laminated wood in the form of blockboard, laminboard or battenboard (bamboo, plywood made only of sheets up to 6 mm, compressed wood sheets, inlaid wood and furniture parts not covered) | 18% | ||
| 44121310 | Decorative plywood | 18% | ||
| 44121340 | Marine and aircraft plywood | 18% | ||
| 44121350 | Plywood cuttings and trimmings of width up to 5 cm | 18% | ||
| 44121440 | Plywood cuttings and trimmings of width up to 5 cm | 18% | ||
| 44121910 | Decorative plywood | 18% | ||
| 44121930 | Marine and aircraft plywood | 18% | ||
| 44121940 | Plywood cuttings and trimmings of width up to 5 cm | 18% | ||
| 44122210 | Decorative plywood | 18% | ||
| 44122230 | Marine and aircraft plywood | 18% | ||
| 44122240 | Plywood cuttings and trimmings of width up to 5 cm | 18% | ||
| 44122310 | Decorative plywood | 18% | ||
| 44122330 | Marine and aircraft plywood | 18% | ||
| 44122340 | Plywood cuttings and trimmings of width up to 5 cm | 18% | ||
| 44122910 | Plastic laminated plywood | 18% | ||
| 44122920 | Decorative plywood | 18% | ||
| 44122940 | Marine and aircraft plywood | 18% | ||
| 44122950 | Plywood cuttings and trimmings of width up to 5 cm | 18% | ||
| 44123110 | Decorative plywood | 18% | ||
| 44123140 | Marine and aircraft plywood | 18% | ||
| 44123150 | Plywood cuttings and trimmings of width up to 5 cm | 18% | ||
| 44123210 | Decorative plywood | 18% | ||
| 44123230 | Marine and aircraft plywood | 18% | ||
| 44123240 | Plywood cuttings and trimmings of width up to 5 cm | 18% | ||
| 44123290 | Other plywood items — includes plywood sheet | 18% | ||
| 44123910 | Decorative plywood | 18% | ||
| 44123930 | Marine and aircraft plywood | 18% | ||
| 44123940 | Plywood cuttings and trimmings of width up to 5 cm | 18% | ||
| 44129210 | Plastic laminated plywood | 18% | ||
| 44129220 | Decorative plywood | 18% | ||
| 44129240 | Marine and aircraft plywood | 18% | ||
| 44129250 | Plywood cuttings and trimmings of width up to 5 cm | 18% | ||
| 44129310 | Decorative plywood | 18% | ||
| 44129330 | Marine and aircraft plywood | 18% | ||
| 44129340 | Plywood cuttings and trimmings of width up to 5 cm | 18% | ||
| 44129910 | Plastic laminated plywood | 18% | ||
| 44129920 | Decorative plywood | 18% | ||
| 44129940 | Marine and aircraft plywood | 18% | ||
| 44129950 | Plywood cuttings and trimmings of width up to 5 cm | 18% | ||
Loading more… | ||||
Disclaimer: The GST rates and HSN codes listed above are compiled from the latest CBIC notifications and NIC's GST e-Invoice system master codes, to the best of our knowledge. Rates are subject to change based on the Government of India and GST Council updates. RegisterKaro is not liable for any discrepancies or decisions made based on this information. For the most accurate and updated "16th October 2020" of GST and cess rates, please visit the official CBIC website. Need help with GST registration or filing? Talk to a RegisterKaro expert.
Plywood HSN Code ensures the right GST rate is applied and supports accurate GST compliance for wood products.
Related HSN Code Pages
Frequently Asked Questions
Everything you need to know about the HSN code and GST rate for Plywood.
The 8-digit HSN code for plywood depends on the type of plywood, its wood species, surface finish, and intended use. Different plywood products, such as hardwood plywood, softwood plywood, decorative plywood, and marine plywood, may have different 8-digit HSN classifications. Businesses should always match the product specifications with the official HSN description to select the correct code and apply the appropriate GST rate.
