ISI Mark Certification Online in India

Manufacturers need ISI certification when BIS requires their products to carry the ISI Mark under an applicable Quality Control Order (QCO). This certification is generally voluntary, but the Central Government makes it mandatory for specified products based on factors such as consumer safety, public health, and environmental protection.

The requirement mainly applies to:

• Manufacturers of products covered by a QCO: If a product falls under a mandatory QCO that requires the ISI Mark, the manufacturer must obtain the relevant BIS license before selling the product in India.
• Manufacturers of products covered under Scheme-I: BIS grants manufacturers a license to use the ISI Mark after assessing their manufacturing facilities, process controls, quality-control systems, testing capabilities, and product conformity.
• Manufacturers seeking voluntary certification: Manufacturers can also obtain certification for products where the Government has not made certification mandatory, provided the product falls within an applicable Indian Standard and Scheme-I requirements.

The exact requirement depends on the product, applicable Indian Standard, and current QCO. Manufacturers should check the latest BIS list of products under compulsory certification before applying.

The Transition Facilitation (Quality Control) Order, 2026, provides a transitional route for certain goods covered by specified Quality Control Orders. DPIIT notified the order on 25 June 2026, and it applies to 10 specified QCO categories, including toys, footwear, air conditioners, certain electrical appliances, hinges, and furniture.

Under this order, eligible goods can use a BIS Standard Mark under a license through Scheme II of Schedule II to the BIS (Conformity Assessment) Regulations, 2018, subject to the conditions prescribed in the order. The measure provides an alternative compliance route for specified products while retaining the requirement to conform to the applicable Indian Standards.

Manufacturers and suppliers should check whether their product falls under one of the specified QCOs and whether the applicable transition conditions are satisfied before relying on this route.

An ISI Mark serves several key strategic and compliance purposes:

• Legal Compliance: Fulfill mandatory regulatory requirements for selling regulated products in the Indian market.
• Consumer Protection: Ensure products meet established safety parameters through rigorous testing and quality standards.
• Market Access: Open doors to the vast Indian consumer market by meeting entry requirements for regulated product categories.
• Brand Reputation: Build consumer confidence through the visible ISI certification mark that signifies verified quality.
• Liability Reduction: Minimize product liability risks through compliance with established national standards.
• Competitive Advantage: Position your brand as quality-conscious and compliance-oriented in a competitive marketplace.
• Government Procurement Eligibility: May support participation in government tenders that specifically require ISI mark certification.
• Quality Assurance: Establish frameworks for consistent product quality and safety standards throughout production.

Laws Governing ISI Mark Certification in India

The ISI Mark certification framework operates under the following key laws, regulations, and regulatory orders:

1. BIS Act, 2016: Establishes the Bureau of Indian Standards (BIS) as India's national standards body and provides the legal framework for conformity assessment and use of the Standard Mark.
2. BIS Rules, 2018: Provide rules relating to BIS's functions, certification activities, fees, and other matters under the BIS Act.
3. BIS (Conformity Assessment) Regulations, 2018: Set out the conformity assessment procedures, including requirements for granting and maintaining licenses and using the Standard Mark.
4. Quality Control Orders (QCOs): The Central Government issues QCOs for specified products to make compliance with particular Indian Standards and the use of the Standard Mark mandatory.

ISI Mark certification shows that BIS has assessed the product and the manufacturer's ability to meet the applicable requirements. It offers the following benefits:

1. Demonstrates Product Conformity

The ISI Mark indicates that the certified product conforms to the requirements of the relevant Indian Standard. BIS assesses the manufacturer's production facilities, process controls, quality control, and testing capabilities before granting the license.

2. Supports Regulatory Compliance

For products covered by a Quality Control Order (QCO), the manufacturer must obtain the required BIS license or certificate before manufacturing, importing, selling, or distributing the product. ISI Mark certification helps manufacturers meet this mandatory requirement.

3. Builds Consumer Confidence

The ISI Mark gives consumers a visible indication that the product meets the applicable Indian Standard. BIS states that its certification schemes provide confidence to consumers regarding the quality, safety, and reliability of certified products.

4. Supports Market Acceptance

Consumers and organized purchasers may prefer BIS-certified products because the ISI Mark provides evidence of conformity with the relevant Indian Standard. This can support product acceptance in markets where buyers look for recognized quality certification. However, an ISI Mark is different from an ISI trademark, which relates to trademark protection rather than product conformity.

5. Strengthens Quality Control

To obtain and retain a license, manufacturers must maintain appropriate production controls, quality-control procedures, and testing capabilities. BIS also conducts surveillance during the operation of the license.

6. Improves Product Safety

For applicable products, the relevant Indian Standard sets requirements for safety and performance. BIS verifies conformity with those requirements through assessment and testing before granting the license.

7. Enables Use of the ISI Mark

After BIS grants the license under Scheme-I, the manufacturer can use the ISI Mark on the certified product according to the applicable marking requirements. This gives buyers a clear way to identify products covered by the BIS.

8. Provides Ongoing BIS Oversight

BIS monitors licensed products through factory and market surveillance and can take action when products or the use of the Standard Mark do not comply with applicable requirements. This supports continued conformity after certification.

Manufacturers must ensure their products comply with the relevant Indian Standards set by the BIS to become eligible for ISI Mark registration in India. BIS grants the certification only after it verifies that the product meets all prescribed quality and safety requirements.

1. Legal entity: Applicant must be the actual manufacturer with a valid manufacturing license and business registration in India.
2. Manufacturing facility: The factory must have proper infrastructure, quality control equipment, and must permit a BIS audit, during which samples are drawn for lab testing.
3. Product coverage: The item must conform to the relevant Indian Standard and, if listed in a QCO (Quality Control Order), certification is mandatory before sale.
4. Testing capability: The manufacturer must have the testing facilities and capabilities required under the applicable BIS product manual and conformity-assessment procedure. Testing may take place at the manufacturing premises, a BIS-recognized laboratory, or through another permitted arrangement, depending on the product.
5. Quality management: Maintain documented process controls, test records, and qualified technical personnel; submit a quality-assurance plan and testing documentation to BIS.
6. Production consistency: Demonstrate the capability to consistently manufacture products that meet the relevant Indian Standards.

Meeting these statutory and technical requirements paves the way for securing an ISI Mark license and lawfully marketing regulated products in India.

To ensure your product complies with Indian quality standards, the ISI certification process requires the following specific documents to confirm compliance:

The exact documents vary by product, so manufacturers should check the applicable BIS Product Manual before applying. BIS provides product-specific manuals with testing, inspection, and other certification requirements.

Creating an effective ISI Mark compliance program requires careful planning and execution. The ISI Mark registration procedure is as follows:

1. Identify Applicable Indian Standard

Determine the specific Indian Standard (IS) that applies to your product to understand the exact requirements your product must meet.

2. Prepare and Submit Application

Complete the Form-V application with the required manufacturer, product, and compliance details. Upload the supporting documents and submit the application with the applicable fees through the BIS Manak Online portal at manakonline.in.

3. Sample Submission

Provide representative product samples for comprehensive testing against applicable standards at BIS laboratories.

4. Initial Factory Assessment

BIS officials conduct an on-site inspection of the manufacturing facility to verify production processes, quality control measures, and testing capabilities.

5. Laboratory Testing

Products undergo comprehensive testing at BIS laboratories to verify compliance with all relevant standard parameters specified in the Indian Standard.

6. Review of Test Reports and Inspection

BIS authorities evaluate both laboratory test results and factory inspection reports to determine compliance with relevant standards.

7. Grant of License

Upon successful review, BIS issues the ISI Mark license, allowing you to mark your products with the distinctive ISI certification mark along with your license number.

8. Regular Surveillance

After certification, products and manufacturing facilities undergo periodic and surprise inspections to ensure ongoing compliance with standards.

9. Renewal

This license can initially be granted for up to two years and may be renewed for one to five years. Manufacturers must submit the renewal application through the BIS online portal with the applicable fees, production details, and other required documents.

The cost of obtaining an ISI Mark license depends on the product, applicable Indian Standard, testing requirements, inspection needs, and marking fee. BIS does not prescribe one fixed total fee for every product.

Under Scheme-I, BIS currently specifies a ₹1,000 application fee and an inspection fee of ₹7,000 per man-day. The applicant must also pay the applicable annual license fee and product-specific marking fee when BIS grants the license.

The marking fee is product-specific, and BIS publishes the applicable rates for products covered under Scheme-I. BIS's fee schedule also includes amendments to marking fees, including updates issued in 2026.

What Determines the Total ISI Certification Cost?

The final cost depends mainly on the following factors:

• The Indian Standard applicable to the product
• Number and type of tests required
• Testing arrangement permitted for the product
• Number of inspection days required by BIS
• Applicable marking fee and minimum marking fee
• Duration for which the manufacturer seeks the license

Manufacturers should therefore avoid relying on a fixed package price for ISI certification. BIS requires applicants to check the product-specific requirements and applicable fees before submitting the application.

Manufacturers must obtain the required license under BIS before selling products for which the Central Government has made the Standard Mark compulsory. Section 17 of the BIS Act, 2016 restricts the manufacture, import, storage, sale, or exhibition for sale of such goods without the required Standard Mark.

A violation can result in significant financial and criminal penalties:

• First contravention: Imprisonment for up to two years, or a fine of at least ₹2 lakh, or both.
• Second and subsequent contraventions: Imprisonment for up to two years, or a fine of at least ₹5 lakh, which can extend to ten times the value of the goods, or both.
• Seizure: BIS officers can search premises and seize goods, materials, or documents where the Act's specified contraventions are suspected.
• Non-conforming certified products: BIS can direct a license holder to stop supply or sale and recall products that carry the Standard Mark but do not conform to the applicable Indian Standard.

Using the Standard Mark without the required license is different from merely failing to meet a voluntary certification requirement. Manufacturers should first verify whether their product falls under a mandatory Quality Control Order before placing the ISI Mark on the product.

You can verify an ISI Mark online by checking the CM/L license number printed next to the mark on the product. Enter this license number on the official BIS portal (manakonline.in) or check it through the BIS Care app to confirm whether the license is genuine and active.

The verification details can help you confirm:

• Manufacturer's name
• Certified product
• Applicable Indian Standard
• BIS license number
• License status

Always verify the license number against the product and manufacturer details shown in the BIS records. This allows buyers to identify whether a product carries a valid ISI Mark and helps detect incorrect or unauthorized use of the mark.

ISI Mark certification under BIS Scheme-I has the following key characteristics:

1. Conformity with Indian Standards: Manufacturers must ensure that their products meet the requirements of the applicable Indian Standard before BIS grants the license.
2. Product-Specific Certification: The ISI Mark applies to specific products covered by an Indian Standard. Manufacturers must identify the applicable standard before applying for certification.
3. Manufacturing and Testing Assessment: BIS assesses the manufacturer's production facilities, process controls, quality-control arrangements, and testing capabilities during the certification process.
4. Factory and Market Surveillance: BIS conducts surveillance during the license period to verify that certified products continue to conform to the applicable requirements.
5. License Validity: BIS initially grants an ISI Mark license for one to two years. Manufacturers can renew the license subject to the applicable requirements and fees.
6. Compliance Records: Manufacturers must maintain relevant production, testing, and quality-control records to demonstrate continued conformity.
7. Mandatory Certification: The Government can make certification mandatory for specified products through Quality Control Orders (QCOs).